Teach Soap

What is the trick to using pvc pipes to mold round soaps, both m&p and cold process? I have tried twice and can't get the soap out very easily. D I need to line it?

Welcome!
For MP soap, it can go in the freezer. For cold process soaps, the inside can be either brushed with mineral oil or vaseline, or lined.

_________________
Irena
Closed minds are like faulty parachutes; they refuse to open.

so I don't need to prep the tube at all with m&p? Thanks for your help!

_________________
Irena
Closed minds are like faulty parachutes; they refuse to open.

You can also cut the pvc pipe in half and when your going to use it ,you tighten it up really well with rubber bands,tie a plastic at the bottom of the pvc pipe,so the soap won't leak out and when it's cured you can just pull the pieces off. That's how I do it.

I do use good quality, brambleberry. Wildchild, do you happen to have a picture of your prepped tube?

_________________
The Soap Geek : CreatedSwell

_________________
Irena
Closed minds are like faulty parachutes; they refuse to open.