Teach Soap

I just made my first batch of melt and pour soap, a really small batch first time. My problem is that the jojoba beads seemed to have all gone to the top, any hints to get them to mix in better?

went through some older posts and found some answers. will try again in the morning and post my results, thanks teachsoap for keeping relative information handy.

If you put exfoliants like beads or oatmeal into warm soap without stirring them in till the soap cools,they will all end up on the top of your soap.You need to stir your beads into the cooling soap and keep stirring gently until the beads stay suspended in the soap then pour into your mold .

_________________
Pauline
http://www.facebook.com/SudsandKissesSoaps
Founding member & admin of Melt & Pour Soap Crafters.

I agree with the person above:) when I make my soaps with apricot seeds I usually stir the soap when I pour it in the mold then add seeds and put a little more soap and stir again and by then they will all suspend bu I also think it's cool when they rise to the top because you have an exfoliant side and a soft side!

_________________
Blog- http://hubpages.com/profile/Ellarose92