Teach Soap • View topic

View unanswered posts | View active topics

Board index » Teach Soap Forum » Cold Process Soap

All times are UTC - 8 hours

First seize

Moderators: Bramble Girl, soapbuddy, Bramble Momma

Page 1 of 1

[ 8 posts ]

Previous topic | Next topic

Author

Message

beccaboo821

Post subject: First seize

Posted: Sat May 30, 2009 9:02 pm

Joined: Sat May 23, 2009 4:04 pm
Posts: 90

I was making pumpkin pie soap today using pumpkin pie fragrance from the sage.

All seemed to go well, I mixed the oil at 120 and lye at 105, they mixed nicely and everything, I was using the stickblender, then about a min in my blender just got stuck. Before I could even add the pumpkin puree!! I didn't know what to do with it and wasn't about to throw it away so I mixed in the puree with my hands as best I could and mashed the soap into my mold.
It gelled immediately!
I read about spice fragrances speeding things up but man that was some speeeed!

I'd like to try again, any tips? Not use the stick blender, maybe add less FO? I think I added way too much I put 1.5 for 3lbs because i wanted it to smell really strong! That was a bad idea. Also I added it pre-trace which might have been a bad idea as well

Top

soapbuddy

Post subject: Re: First seize

Posted: Sat May 30, 2009 9:22 pm

Joined: Mon Jan 14, 2008 11:14 pm
Posts: 24336
Location: Mistress Of Lather

Yes, spices tend to accelerate trace. Use a stainless steel whisk instead and have both oils and lye water at around 110 degrees.

_________________
Irena
Closed minds are like faulty parachutes; they refuse to open.

Top

magic_hands

Post subject: Re: First seize

Posted: Sun May 31, 2009 3:42 pm

Joined: Mon Jan 14, 2008 4:58 pm
Posts: 752
Location: Pensacola

Were you using full water? That can help, too.

The amount of FO you used was about right, but spice scents are tricky beasts.

_________________
http://www.magichandsworkshop.com
http://www.magichands.etsy.com
http://www.magichandsworkshop.blogspot.com

Top

beccaboo821

Post subject: Re: First seize

Posted: Mon Jun 01, 2009 9:08 am

Joined: Sat May 23, 2009 4:04 pm
Posts: 90

No I used 6 oz pumpkin puree, I saw on david fishers blog, and his soap turned out really nice. So I deducted the 6 oz from the total water weight.

Top

magic_hands

Post subject: Re: First seize

Posted: Mon Jun 01, 2009 9:28 am

Joined: Mon Jan 14, 2008 4:58 pm
Posts: 752
Location: Pensacola

How much pumpkin was that, in comparison to the batch size and the remaining water weight? It might have been too much for your recipe - hard to tell without something to compare it to.

_________________
http://www.magichandsworkshop.com
http://www.magichands.etsy.com
http://www.magichandsworkshop.blogspot.com

Top

beccaboo821

Post subject: Re: First seize

Posted: Mon Jun 01, 2009 9:32 am

Joined: Sat May 23, 2009 4:04 pm
Posts: 90

My oil weight was 47 oz. Water weight was 17.8 so with 6 oz deduction (pumpkin puree) 11.8 oz.

Top

magic_hands

Post subject: Re: First seize

Posted: Mon Jun 01, 2009 9:37 am

Joined: Mon Jan 14, 2008 4:58 pm
Posts: 752
Location: Pensacola

That's a little high for pumpkin, which can overheat a bit, too - probably a combination of the pumpkin, the fragrance, and the temps you were working at.

_________________
http://www.magichandsworkshop.com
http://www.magichands.etsy.com
http://www.magichandsworkshop.blogspot.com

Top

beccaboo821

Post subject: Re: First seize

Posted: Mon Jun 01, 2009 10:02 am

Joined: Sat May 23, 2009 4:04 pm
Posts: 90

should i cut the pumpkin in half?

Top

Page 1 of 1

[ 8 posts ]

Board index » Teach Soap Forum » Cold Process Soap

All times are UTC - 8 hours

Who is online

Users browsing this forum: Google [Bot] and 22 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum