Teach Soap

I made a batch of gms scented with 'oatmeal, milk & honey' on March 25. I did not insulate, nor did I set in the fridge or freezer. I let it gel. I went to cut it just now. When I did, the middle oozed in large portions & the bottom of the loaf looked burnt. I'm certain it did burn. My question is, can I rebatch this soap? I was not able to save any of the liquid that came out of the loaf as it went all over my counter and onto the floor. If I can rebatch it, what are the exact steps I need to follow to do this. I am thoroughly embarrassed about asking for help on this and equally embarrassed that this has happened. I've never had this happen before. My temperature for the oil was around 105 and on the milk/lye 100. Thank you for any help and advice that you can give me.

Sounds like it overheated. You could try to rebatch, but the soap might be drying, due to the liquid lost.
Try to rebatch a small amount in a cup in the microwave. Micro in short bursts till it melts, then glop into your mold.
See if that works for you.

_________________
Irena
Closed minds are like faulty parachutes; they refuse to open.