Teach Soap

I'm sure that this has been asked before but I can't seem to find the post. I made a batch of soap 2 days ago that I put in the fridge and let sit overnight. After the soap was poured into the molds I realized that I had way more soap than I usually do with this recipe. I started to re-trace my steps and remember that the palm oil seem to be a lot more that what I usually remember. Up until now I believed that my scale was accurate. So, I've cut my soap and it has been sitting on drying racks, but now I see that it's sweating and dripping (very little) and it's really soft. It passed the zap test. What should I do with this?

If it passed the zap test, I wouldn't worry too much. Whenever I put a soap in the fridge, it does sweat later and is softer than if I had let it gel. Could you try to CPOP to see if it hardens up?

How would I cpop if I have already cut the bars?

_________________
Irena
Closed minds are like faulty parachutes; they refuse to open.

I think that I'm going to try it in the oven. Would I use the same directions as if I had never cut it in the first place? Preheat oven to 170 let it sit thru a complete gel phase and then either remove or let sit overnight in the oven with the heat off?

_________________
Irena
Closed minds are like faulty parachutes; they refuse to open.