Hello all! Newbie here. I made 3 batches of soap this past weekend. 2 turned out great and the other one, well, that's why I'm posting here to ask for your help.

I don't have the exact recipe on me as I'm at work but it was a mix of Coconut, Olive Oil, and Palm. I used a lye calculator and am fairly confident the recipe was not the issue. I also used a FO and oxide color. Having made a successful batch yesterday and re-watching soap tutorials online I think I took it to a much too heavy trace and the FO caused it to seize. As I was stirring in the FO the soap started to curdle--the outside was solidifying while the inside was gooey. I panicked because it was too gloppy to put into the mold (I thought) so I cooked it on medium-low heat on the stove for 10 minutes until it was thoroughly gooey (and yet much thicker than most soap tutorial videos show). I took it out of the mold and it is fairly hard. Did a zap test and it's just soapy. Also, when I washed out the pan I was getting lots of sudsy action whereas with the "correct" batch I did not.
My question is this: because I cooked it on the stove does that make it hot process and therefore ready to use right away??